RotatingProgressBar

Progress Bar that rotates an image around its center. Inherits all properties from Panel.

Properties

image: The image to rotate
start_degrees: The amount of degrees for 0%
end_degrees: The amount of degrees for 100%
approach_speed: The maxmium amount of degrees per second it can turn. Defaults to 360.
rot_origin_x_percent: The origin x point from 0 to 1. Defaults to 0.5 (center) See: Mid Point
rot_origin_y_percent: The origin y point from 0 to 1. Defaults to 0.5 (center) See: Mid Point
rotating_x: Defaults to 0. See: Mid Point
rotating_y: Defaults to 0. See: Mid Point
rotating_wide: Defaults to 0. See: Mid Point
rotating_tall: Defaults to 0. See: Mid Point

fieldName: Determines the name of the control.
xpos: Determines the horizontal offset from the top left (by default) of the parent panel.
ypos: Determines the vertical offset from the top left (by default) of the parent panel.
wide: Determines the width of the control.
tall: Determines the height of the control.
zpos: Determines the depth of the panel. Deeper panels are drawn first. Lower numbers = deeper.
pinCorner: The pinned corner is the one positioned at xpos/ypos. Values are: TOPLEFT (default), TOPRIGHT, BOTTOMLEFT, BOTTOMRIGHT
pinnedCornerOffsetX:
pinnedCornerOffsetY:
unpinnedCornerOffsetX:
unpinnedCornerOffsetY:
visible: Determines if the control will be drawn.
enabled: Determines if the control is enabled. Used by controls higher up the chain (like Buttons).
ignoreScheme:
tabPosition: Determines the tab order of the control.
tooltiptext: Determines the tooltip text to show when you hover over this control.
paintbackground: Paint the background color of this control.
paintBackgroundType:
paintborder: Paint the border of this control.
autoResize: Sets which edges of the panel can be resized. Values are: 0 (NO, default), 1 (RIGHT), 2 (DOWN), 3 (DOWNANDRIGHT)
fgcolor_override: Sets the foreground color
bgcolor_override: Sets the background color