Dedicated Server Setup: Difference between revisions

From Empires Wiki
Jump to navigation Jump to search
(APT dedi set up changes)
m (APT explanation)
Line 30: Line 30:
=== Dedicated Server - APT ===
=== Dedicated Server - APT ===
{{Fixme}}
{{Fixme}}
This method will install the server as a service, with tmux. (with tmux you run the server in a separate terminal window, so you can switch between the dedicated server and linux environment)
Installing a dedicated server is supported on [https://www.debian.org/CD/netinst/ 32 bit Debian 10]. <br>
Installing a dedicated server is supported on [https://www.debian.org/CD/netinst/ 32 bit Debian 10]. <br>
Debian 11 has some packages deprecated, this method will not work as described. However you can start with Debian 10 and then later upgrade to 11. <br>
Debian 11 has some packages deprecated, this method will not work as described. However you can start with Debian 10 and then later upgrade to 11. <br>
If you have a 64 bit install you might need to execute the following as root: <br>
If you have a 64 bit install you need to execute the following as root:  


  dpkg --add-architecture i386
  dpkg --add-architecture i386

Revision as of 00:45, 4 February 2024

Empires Server Resources
Dedicated Server Setup | Cvars | Optimization | Sourcemod Plugins



Dedicated servers are like the listen servers (which can be created by pressing the "create server" button on the main menu), but they don't require a copy of the game to be running. This is less resource intensive as the server doesn't need to spend any time rendering graphics.

Installation

There are two supported ways of installing a dedicated server. On Windows and Linux, you can install the server using the SteamCMD utility. On Debian-based distributions of linux, you can also install the server through APT, this will set it up as a service and with tmux.

Dedicated Server - SteamCMD

The Empires Dedicated Server can be installed using the SteamCMD utility. The server has an appid of 460040, and must be downloaded while logged in as an anonymous user.

To install the server on Windows:

  • Install SteamCMD.
  • Open a command line window with elevated / local administrator privileges
  • Browse to the location where SteamCMD was installed, and enter this command:
steamcmd.exe +login anonymous +app_update 460040 validate +quit
  • This same command can also be used to update Empires Dedicated Server.

Once the server has been downloaded, you can launch the server by navigating to the installed location of SRCDS.exe and running the following console command:

srcds.exe -game "empires" -console -toconsole -secure +map emp_district402 +maxplayers 64

To allow players to connect to your server from outside your local network, you may need to port-forward the following ports:

  • UDP 27005
  • TCP and UDP 27015

Dedicated Server - APT

~Fixme

This method will install the server as a service, with tmux. (with tmux you run the server in a separate terminal window, so you can switch between the dedicated server and linux environment)

Installing a dedicated server is supported on 32 bit Debian 10.
Debian 11 has some packages deprecated, this method will not work as described. However you can start with Debian 10 and then later upgrade to 11.
If you have a 64 bit install you need to execute the following as root:

dpkg --add-architecture i386
apt update
apt install lib32gcc1

Execute the following in a root shell to add the key and repository:

apt install gnupg2
curl https://deb1.ws.maxmaton.nl/debian/signing.pub | apt-key add -
echo 'deb http://deb.maxmaton.nl/debian buster main non-free' > /etc/apt/sources.list.d/maxmaton.list
apt update

After that you can continue with:

apt update
apt install empires-server

Your server is now up and running.

You might also need to manually port forward the following ports:

  • UDP 27005
  • TCP and UDP 27015

If you also want the community provided maps, you can install the empires-server-maps-extra package (warning, takes a long time to install):

apt install empires-server-maps-extra

Opening the server console

To open the server console, execute the following command:

su - empires -c "tmux attach"

To get out of the server console, dont do CTRL + C or you will kill the server
You can do CTRL + B and then CTRL + D to detach and get out of server console
You can do CTRL + B and then page up and page down to scroll higher in console, then ESC to get out of the CTRL + B mode (tmux basics, you can google them)

Server folder is located in /var/lib/empires

Start parameters can be edited in /etc/empires-server.conf

More detailed/full start parameters are inside the service /usr/lib/systemd/system/empires-server.service

You can also start or stop the empires-server service

service empires-server stop
service empires-server start

Configuration

Cvars

Most configuration can be done through the use of [Server Cvars]. There are several ways commands can be set to run automatically:

  • Include the command in the call to SRCDS. This is how the maxplayers cvar is set in the example above. This will run the command as soon as possible.
  • Include the command in the /cfg/autoexe.cfg file. This will run the command once on server start-up, before any maps have loaded.
  • Include the command in the /cfg/server.cfg file. This will run the command every time any map loads.
  • Include the command in a /cfg/maps/[mapname].cfg file. If there is a .cfg file in this directory with the same name as a map, the commands in it will be run every time that map loads. Use this for map-specific configuration changes, such as adjusting the resource multiplier or ticket count.

The following configuration options are the ones you will most likely need to change:

Common Configuration
Command Description
hostname The name of your server, as it appears in the server browser.
rcon_password A password that can be used to send server commands remotely.
Warning  Warning: Set this to a secure password, and do not share it freely. Anyone with this password can execute admin commands on your server.
sv_password If this is set, players will be required to enter this password before joining the server.
sv_downloadurl The URL of a FastDL server.
sv_region A number representing the region your server is located in. A list of valid regions [can be found here].
sv_contact An email address players can use to contact the server owner.
sv_setsteamaccount Link the server to a Steam account using an authentication token.
~Fixme
Why/under what circumstances should this be done?
maxplayers The maximum number of players allowed to join the server. This can only be set as part of the command that launches SRCDS.

FastDL Setup

The FastDL system allows server owners to specify a URL from which custom content will be downloaded. This speeds up the process of players downloading custom content when joining a server, so setting this system up is highly recommended.


~Fixme
We need instructions here on how to set up a FastDL server.

Server Extensions

There are several plugins available for use in Empires. Two extension systems are available (and can run in parallel):

  • SourceMod is the most common system, and is used for the majority of plugins. Handy SourceMod plugins that have been confirmed to work on Empires servers are:
    • Ungrief Command Vehicle - Teleports the specified command vehicle to where you are looking. Usage: !ungrief <nf | be | imp>
    • SourceBans - A free global administration and banning system for Source engine based servers.
    • Kigen's Anti-Cheat (Requires Sockets 3.0.1 plugin) - An extensive anti-cheating plugin.
    • For more plugins, look at the Sourcemod Plugins page.
  • SourceOp is less popular, but is required to run an anti-DoS plugin:

Both systems themselves run on MetaMod, allowing them to run in parallel.

Tips and Tricks

Customize server.cfg settings

As the server.cfg (amongst others) can be overwritten during upgrade and you may wish to have your server run in different "modes" such as password protected clan match/practice, increased resource rates for "tank wars", etc, it is best to treat your server.cfg as "read-only".

Any default settings you wish to use can be placed in a separate file such as "myserver.cfg". At the end of server.cfg, you can then add the line "exec myserver.cfg".

This way, server.cfg will then run myserver.cfg and override any server.cfg settings.

Loading various server "modes" can then be done by calling them in the server console:

rcon exec tankwars.cfg

If you want a mode to be automatically loaded after map change / server restart, you can add another line to server.cfg below the "exec myserver.cfg" entry.

As an example of custom configuration you might want to use, the following line will disable the ability to join spectators at the start of the round:

emp_allowspectators 0; wait 30000; emp_allowspectators 1

It should be put at the end of the .cfg file so as to not delay any subsequent commands. The wait command delays all further commands by the amount specified in 1/100ths of a second.

Running a beta server

Running a beta server is just like a normal server, with the desired steam branch mentioned when downloading the server package.

steamcmd.exe +login anonymous +app_update 460040 -beta beta validate +quit

See this link for more info on automating server creation, and on switching to specific steam branches. https://developer.valvesoftware.com/wiki/SteamCMD#Automating_SteamCMD

Related Links